Skip to main content

VOIP Consumer market - Middleware News

Consumer market


Example of VoIP adapter setup in residential network
A major development starting in 2004 has been the introduction of mass-market VoIP services over broadband Internet access services, in which subscribers make and receive calls as they would over the PSTN. Full phone service VoIP phone companies provide inbound and outbound calling with Direct Inbound Dialing. Many offer unlimited calling to the U.S., and some to Canada or selected countries in Europe or Asia as well, for a flat monthly fee as well as free calling between subscribers using the same provider. These services have a wide variety of features which can be more or less similar to traditional POTS.
There are three common methods of connecting to VoIP service providers:

A typical analog telephone adapter (ATA) for connecting an analog phone to a VoIP provider
  • An Analog Telephone Adapter (ATA) may be connected between an IP network (such as a broadband connection) and an existing telephone jack in order to provide service nearly indistinguishable from PSTN providers on all the other telephone jacks in the residence. This type of service, which is fixed to one location, is generally offered by broadband Internet providers such as cable companies and telephone companies as a cheaper flat-rate traditional phone service.
  • Dedicated VoIP phones are phones that allow VoIP calls without the use of a computer. Instead they connect directly to the IP network (using technologies such as Wi-Fi or Ethernet). In order to connect to the PSTN they usually require service from a VoIP service provider therefore most people also use them in conjunction with a paid service plan.
  • A softphone (also known as an Internet phone or Digital phone) is a piece of software that can be installed on a computer that allows VoIP calling without dedicated hardware. An advantage of using a softphone with a VoIP service provider is the ability of having a fixed phone number which you can move to any country or location (This is also possible with ATAs and VoIP phones, however requires the physical relocation of the hardware).

Comments

adsrerrapop

Popular posts from this blog

Troubleshooting Java/JMS SSL Configurations - Middleware News

 This document is intended to help diagnose WebSphere MQ V7 Java™ or JMS SSL setup errors. It lists most of the common configuration errors that can cause an SSL connection from a Java/JMS client to a queue manager to fail, and gives the course of action to resolve the problem. In each case the error can be diagnosed by a combination of the error seen in the client log - either a console output, trace file or SystemOut.log file - and the queue manager's error logs. The document is quite long, so the easiest way to find the potential error is to search for one of the errors seen in this list, then filter this list using the error from the opposite end of the channel. All cases here assume that 2-way authentication is being attempted (SSLCAUTH set to REQUIRED on the queue manager's SVRCONN channel). This is the default, and the errors are very similar for 1-way authentication (SSLCAUTH set to OPTIONAL). Symptom Instructions on collecting documentation...

Using telnet to test connectivity between IBM Websphere MQ Client and MQ server - Middleware News

You are having trouble connecting a WebSphere MQ client to a MQ server, receiving errors that you can not connect to the MQ queue manager. One of the first things to determine is if the two machines can communicate, and using the telnet tool is one way to accomplish it. Symptom Receiving errors which state that a queue manager is not found or not available. Connection errors. For example: AMQ9213, AMQ9524, AMQ9202 or AMQ9508 or MQRC =2059 0x0000080b MQRC_Q_MGR_NOT_AVAILABLE. Please note, this is by no means an exclusive list of errors related to this type a problem but just a sample of some of the more common error messages and codes that might occur. Cause One possible cause is that the two machines can not communicate. May be the IP address or hostname was not properly specified by the MQ client. The port number might be incorrect. A queue manager is not running at the desired host. The queue manager could be running, but the corresponding listener is not runnin...

IBM Websphere MQ interview Questions Part 5

MQ Series: - It is an IBM web sphere product which is evolved in 1990’s. MQ series does transportation from one point to other. It is an EAI tool (Middle ware) VERSIONS:-5.0, 5.1, 5.3, 6.0, 7.0(new version). The currently using version is 6.2 Note: – MQ series supports more than 35+ operating systems. It is platform Independent. For every OS we have different MQ series software’s. But the functionality of MQ series Default path for installing MQ series is:- C: programfiles\BM\clipse\SDK30 C: programfiles\IBM\WebsphereMQ After installation it will create a group and user. Some middleware technologies are Tibco, SAP XI. MQ series deals with two things, they are OBJECTS, SERVICES. In OBJECTS we have • QUEUES • CHANNELS • PROCESS • AUTHENTICATION • QUERY MANAGER. In SERVICES we have LISTENERS. Objects: – objects are used to handle the transactions with the help of services. QUEUE MANAGER maintains all the objects and services. QUEUE: – it is a database structure ...